WH-SD008 Sludge Concentration Meter
WH-SD008 Sludge concentration Sensor and Meter
- Multi-light beam measurement technology, compensate for environmental impacts
- Multi -parameters display at the same time: measurement value, output current, time, concentration percentage, etc.
- 4-20mA transmission output, relay high/low alarm control output, RS485 communication output and other variable output, system intelligent control
- Adopting two -point calibration method, can correct the sensor error
- Various installation methods
- Multiple measurement units optional
Applications:
In the sedimentation tank of the water plant, it is used to monitor and handle suspension and sludge in the water to improve the quality of water outlet
In the sedimentation tank of the mines, it is used to monitor and control the concentration of the sludge to optimize the treatment effect
Used for the sewage treatment plant in the initial sedimentation tank, the second sedimentation tank and concentrated pool, it can continuously monitor the sludge concentration at different stages to control the processing efficiency
Parameters:
| Measurement range | 0~20g/L |
| Display method | LCD display |
| Measurement Unit | g/L, mg/L and NTU , optional |
| Resolution | 0.001g/L or 1mg/L |
| Accuracy | ±1.0% FS |
| Repeatability | ±1.0%FS |
| Environment Temperature | -20~60℃ |
| Relative Humidity | （65±20）% |
| Analog output | 4~20mA、Load 750Ω |
| Alarm Output | Double relay |
| Digital Output | RS485 ( digital output ) |
| Power supply | AC220V±10% or DC24V |
You May Like
WH-RL017 Radar level Meter- WH-CD010 Conductivity Meter
- WH-V002 Vortex Flow Meter
- WH-CL004 Residual chlorine meter
- WH-3051DP Differential Pressure Transmitter
- WH-F005 Fluoride Meter
- WH-ZR019 Zirconia Oxygen Analyzer
- WH-PH003 PH Sensor and Meter
- WH-UL015 Ultrasonic Level Transmitter
- WH-S007 Suspended Solids Meter
